Clutch pressure plate

Writer： admin Time：2021-05-26 14:11 Browse：℃

The clutch pressure plate is an important structure of the truck, which works together with the clutch disc and plays an important role in the safety of the truck. The torque from the engine is transmitted to the clutch disc through the friction of the flywheel and the contact surface of the pressure plate with the clutch disc.

When the driver steps on the clutch pedal, the large end of the diaphragm spring drives the pressure plate to move backward through the transmission of the mechanical parts. At this time, the driven part is separated from the active part.

In order to reduce the loss of the clutch disc and pressure plate, the clutch pedal should be used correctly. Try not to half-depress the clutch pedal. If the clutch pedal is half-depressed, so that the clutch disc is in a half-clutch state, the flying disc and the pressure plate will always be in a state of friction, increasing its loss.

If the clutch pedal is fully depressed, the flywheel and the clutch pressure plate are completely cut, and there is no friction between the two. If the clutch pedal is fully lifted, the flywheel and the clutch pressure plate are fully integrated. Although there is friction, but there is basically no friction. Therefore, for the long life of the clutch pressure plate and driving safety, correct driving behavior is particularly important.